QC: panels cantilevers conform to QCELLs’ specs

QC: panels cantilevers conform to QCELLs’ specs

QC: Cable tying; bending radius.

QC: Cable tying; bending radius.

QC: framing spans conform to Schletter spec’s.

QC: framing spans conform to Schletter spec’s.

QC: Inverter DC / AC wiring

QC: Inverter DC / AC wiring

QC: Lead flashing installation, for tiled roofs.

QC: Lead flashing installation, for tiled roofs.

Clear and compliant electrical drawings.

Clear and compliant electrical drawings.

QC: cable work and bending radius.

QC: cable work and bending radius.

QC: photo showing no cable on the roof.

QC: photo showing no cable on the roof.

QC: Stainless Steel ties.

QC: Stainless Steel ties.

QC: Solar Neutral; SWB wiring

QC: Solar Neutral; SWB wiring

Testing & Commissioning is done to AS5033 standards and documented via a mobile-phone app.

Testing & Commissioning is done to AS5033 standards and documented via a mobile-phone app.

Documentation meets all aspects of AS 5033

Documentation meets all aspects of AS 5033

250-500 pv installations under the solar savers’ project

In March 2018, iEnergytech was appointed as the lead contractor for the Solar Saversʼ programme. Led by the EAGA, the Solar Saversʼ programme involves some 25 councils in Victoria and enables retirees and pensioners to access safe, compliant and quality PV installations for their homes. The current phase of the program is expected to run to June 2019.

Just wanted to thank everyone involved in my recent solar installation. From start to finish the process has been excellent and I’m delighted with the quality of both the installation and the system.

Once again, thank you.
— Gary Middleton - Solar Savers' Customer
Delivering hundreds of 3 - 5kWp solar PV systems for homes, designed and built to the same high standards of installation that have garnered iEnergytech unique awards and recognition in the industry was daunting from the outset.

Several changes were made to our internal processes to meet this challenge: from the development of a QC software ‘Sooryaʼ onto which the installer is to load photos at each key stage of the installation, to cloud-based SWMs and Testing and Commissioning systems, much was addressed to ensure compliance was achieved.

The program has not been without challenges but it has been an opportunity for iEnergytech to further strengthen its processes in this industry
— Udayan Bhanot, Managing Director